OVAS

Aquarist Forums => Saltwater General Discussions => Topic started by: 10gnano on March 16, 2010, 12:42:01 PM

Title: acrylic or glass??
Post by: 10gnano on March 16, 2010, 12:42:01 PM
are all bow front tanks acrylic or are some of them glass?? I am wanting to drill a 36 gallon that i got but i dont know if it is glass or acrylic?
Title: Re: acrylic or glass??
Post by: ciaus on March 16, 2010, 01:52:03 PM
Too my knowledge all bow fronts are acrylic. 
You can tell the difference by trying to make a small scratch in the material, do it in a discreet location.  A paper clip will score acrylic, but not leave a mark on glass...

hth

Ciaus
Title: Re: acrylic or glass??
Post by: QueensU on March 16, 2010, 09:27:25 PM
If its a 36 gal bowfront, its probably glass. Aqueon makes a 36 gal bowfront in glass, they sell them at pet smart.
Title: Re: acrylic or glass??
Post by: new2salt on March 16, 2010, 09:36:42 PM
JBJ 24DX Nano
Curved front and round corners

Made of GLASS

They can do wonderful things with glass & curves

Ciaus is right about how to tell - try to scratch it in an inconspicous spot.

Only way to know for sure.
Title: Re: acrylic or glass??
Post by: Funkmotor on March 17, 2010, 12:27:41 AM
Quote from: new2salt on March 16, 2010, 09:36:42 PM
Only way to know for sure.

I beg to differ...

You can't put an acrylic tank together with silicone...you must use the proper solvents for acrylic, and they leave no gaps between pieces...they fuse them together.

If your tank is held together with silicone, it must be glass.  The only problem now is telling if it is tempered glass or not, as you can't drill tempered glass.
Title: Re: acrylic or glass??
Post by: ciaus on March 17, 2010, 02:54:56 AM
Ya learn something new everyday....Sorry about the misinformation regarding the material....
Title: Re: acrylic or glass??
Post by: JetJumper on March 17, 2010, 08:59:22 AM
Quote from: Funkmotor on March 17, 2010, 12:27:41 AM
I beg to differ...

You can't put an acrylic tank together with silicone...you must use the proper solvents for acrylic, and they leave no gaps between pieces...they fuse them together.

If your tank is held together with silicone, it must be glass.  The only problem now is telling if it is tempered glass or not, as you can't drill tempered glass.

Thanks for clearing that up, I was also wondering about that.