Meeting location for the 2024/2025 Season will be at J.A. Dulude arena.  Meetings start at 7 pm.

CO2 Question

Started by Aquafish, April 12, 2006, 07:36:12 PM

Previous topic - Next topic

Aquafish

Hello,

Anyone know how this product actually works? What do you need to attach it to???

http://www.aqua-medic.com/products/products.php?category=CO2%20Equipment&product=Reactor%20500

Thanks

Aiglos

Aquafish: reread what you wrote.. I do not understand exactly what you are asking.

Aquafish

sorry...forgot to attach the link

mseguin

BigDaddy had one during his CO2 presentation last month. From what I understand, the co2bubbles spiral up the reactor whle water is pumped in the opposite direction, increasing the amount of co2 that gets dissolved.

Aquafish

So, you need a water pump to go thru it? Or do you attach it to a canister filter???

Quatro

Check this item.  Basicly your part attached to a water pump on a mounting plate.  If you look above the pump you will see a connector for a CO2 source.

http://cgi.ebay.ca/CO2-REACTOR-M-COMBO-W-POWERHEAD-by-AquaMedic_W0QQitemZ7756417542QQcategoryZ3212QQssPageNameZWD1VQQrdZ1QQcmdZViewItem

Mike S