Tunze 6025 mod for more flow

[Adam]

Hi,

I just did this mod (the standard mod) http://www.sdmas.com/wiki/Tunze_6025_Mods .

I'd say the output of my pump is now 1.5x-2x more than what it was.  The flow is more directional (vs. dispersed) than before.  I didn't need any special tools other than some of those pliers that cut wires etc.  I just cut away, filed and sanded the tubes around the impeller and put them back in the tank.  It's a pretty good mod to do if you have 6025s but want more flow.

Adam

[darkphreak]

You can also cut every second rib from the front and rear section of the shroud, increases flow even more.

[Adam]

Good idea.  I'd like to keep mine looking 'stock' from the outside, but I didn't think of that.