Meeting location for the 2024/2025 Season will be at J.A. Dulude arena.  Meetings start at 7 pm.

Emeraude's tank

Started by Emeraude1484, May 02, 2012, 02:37:27 PM

Previous topic - Next topic

Emeraude1484

This is not a new tank build.  If this is not where it should be mods please feel free to reroute :)

I'm starting kind of a tank journal since I think someone might profit from seeing the progress or lack of progress going forward.

Here are some specs:
2year old 90gal Perfecto tank + 20gal sump, had ushio 2x250w 10000k + 2t5s til about a month ago switched to 2x250w xm20000k MH, same t5s. Running gfo, Tunze 9006 skimmer, dsb in sump.
Livestock: 2 clowns, 1 firefish, yellow watchman, mandarin. Usual cleanup crew including 4 emerald crabs.
Crocea and Squamosa (giant)
Corals: pink, yellow birdnests, 2 unknown acro, Turbinaria, torch, chalice, gsp, zoas and ricordeas.

Have been battling valonia, heavy cyano and about a month ago stn on pink birdnest and acros.  Started trying to figure out why.  Found Spec grav was at about 0.19 since the refractometer hadn't been recalibrated in forever.  Fixed that, no improvement in conditions.  Started heavy water changes about 20 gals a week. Slight improvement but stil stn and cyano. Scrapped most of the valonia off.

Have gone from this

To this

In 3 weeks or so.

Parameters don't fluctuate much except for Alk
Specific Grav 1.025
PH: 8.2
Ammonia:0
Nitrite:0
Nitrate:0
Phosphate:0
*DKH:7* lowered from 9 in a day
Calcium:420
Mag: 1200
Tests are API othe than a RED Sea Mag test so will be going Salifert or Hanna shortly.

Calcium needs to come up and mag as well so have decided to start balling salts for Ocean Fresh Aquariums and Start dosing Prodibio. 

First dose of Prodibio was last night will be going 6 weeks of digest and optim only before any other dosing as per recommendations.

Balling starts tonight as well.

I'm looking for health right now but eventually brighter colours would be ideal :D
Wish us luck!

NjOyRiD

#1
So, everything good? :P
370g System

220g tank, 65g Sump. octopus Cone skimmer xp-5000, vertex zf-30 nitrate reactor, RX6 DUO Ca reactor, Mp60w Ecotech pump, 2x 400w MH XM bulbs 15k. All controlled with DA RKE-net controller, Water Blaster HY-3000 return pump, Vertex Zf-15/Carbon, Vertex Zf-15/GFO

Emeraude1484

#2
Quote from: NjOyRiD on May 02, 2012, 04:35:42 PM
So, everything good? :P

Phil

I'm still at work!! No updates since this morning :)

NjOyRiD

#3
hehe you always work you :P

370g System

220g tank, 65g Sump. octopus Cone skimmer xp-5000, vertex zf-30 nitrate reactor, RX6 DUO Ca reactor, Mp60w Ecotech pump, 2x 400w MH XM bulbs 15k. All controlled with DA RKE-net controller, Water Blaster HY-3000 return pump, Vertex Zf-15/Carbon, Vertex Zf-15/GFO

Cheebs

Gorgeous tank!!

Could the lighting change have anything to do with the outbreak? It seems it coincides with when you changed your lights. I had to reduce lighting in my tank for a while to deal with some problematic algae and cyano.

Emeraude1484

Quote from: Chubs on May 02, 2012, 05:37:44 PM
Gorgeous tank!!

Could the lighting change have anything to do with the outbreak? It seems it coincides with when you changed your lights. I had to reduce lighting in my tank for a while to deal with some problematic algae and cyano.

Thanks :) 

I cut the MH time 3 hours thinking the same thing nothing improved until the recalibration of the refractometer... Eek... took me 5 days to get it back up to 0.025...  Cyano still takes over the side of the tank facing the window so I'm thinking maybe sun? The blinds being closed doesn't seem to help either.  Did the 3 days lights out method on RC, which helped but it was back full force within 3 days.  I'm worried about using chemiclean and it wiping out my pod population since I FINALLY just got my Mandy. 

ummm Ray (hubby) also found a rusty hair clip in the sump a couple days back so that might of had something to do with it....

Emeraude1484

#6
Quote from: NjOyRiD on May 02, 2012, 05:09:43 PM
hehe you always work you :P


hehehe Have to bring in the bacon somehow!:D

az

nice tank....maybe add something red?
AQUA VALLEY    
1158 Ogilvie Road, Ottawa

2016 Hours
Tue, Wed, Thu, Fri >> 12-7pm
Sat, Sun >> 11-5pm
Mon >> CLOSED
Tel: 613 695 6961 Fax: 613 695 6532  
www.aquavalley.ca

Ottawa's BIGGEST SALTWATER Selection

Tel: 613 695 6961 Fax: 613 695 6532     www.aquavalley.ca

Emeraude1484

Quote from: az on May 03, 2012, 10:46:24 AM
nice tank....maybe add something red?

Thanks!!! :D
Don't tempt me right now!  Ray keeps telling me I should've gotten that chalice.  ;)  

Emeraude1484

Next step since the wonderful stn seems to have stopped, or at least slowed.

Fragging the acros and pink birdnest affected since only about the top 2.5 inches are alive.  :(  Got a few hours of work ahead!

Emeraude1484

Also trying to figure out how to alter my sump.  The water level is to low to get my Tunze working properly.  Turn of the return for an hour and it's in overdrive, as it is hardly an skimmate.

az

sump/skimmer will work, ask him!
8)
AQUA VALLEY    
1158 Ogilvie Road, Ottawa

2016 Hours
Tue, Wed, Thu, Fri >> 12-7pm
Sat, Sun >> 11-5pm
Mon >> CLOSED
Tel: 613 695 6961 Fax: 613 695 6532  
www.aquavalley.ca

Ottawa's BIGGEST SALTWATER Selection

Tel: 613 695 6961 Fax: 613 695 6532     www.aquavalley.ca

Emeraude1484

Quote from: az on May 03, 2012, 11:08:28 AM
sump/skimmer will work, ask him!
8)

Yeah just need to measure what size piece of plexi needs to go in.  :) I don't know how I missed that for so long.  The water level is about 2 inches short from where it should be. No wonder the thing hasn't been working properly!

Emeraude1484

Altered the sump, skimmer seems to be working better.  Will do a vinegar bath and see if it kicks in more.

Not much of a change with water/sps ie prodibio, but I'd rather see slow change than crash the tank ;) 

On a completely unrelated note...  Chalice is eating and extending feeders everynight :D YAY!

Emeraude1484

Well, Mg is up to 1400, Alk is slowly being raised to 10 and ca 450.

Birdnest is actually starting to grow again  but all acros have taken a turn for the worst stn from the bottom up seemed to have stopped but all of a sudden there are now patches of tissue bleaching and essentially flaking off...  All affected pieces have now been fragged.
I pruned one of my larger acro colonies to where the branches were not just breaking off when touched lightly just to see if it will come back. But the rest... I hope the healthy branches I took for frags will make it through.

Looking into Korallin C1502 Calcium Reactor to run ARM media.  Anyone here use it?

salvini55

How much flow do you have in there?

NjOyRiD

370g System

220g tank, 65g Sump. octopus Cone skimmer xp-5000, vertex zf-30 nitrate reactor, RX6 DUO Ca reactor, Mp60w Ecotech pump, 2x 400w MH XM bulbs 15k. All controlled with DA RKE-net controller, Water Blaster HY-3000 return pump, Vertex Zf-15/Carbon, Vertex Zf-15/GFO

Emeraude1484

Quote from: salvini55 on May 09, 2012, 08:11:39 PM
How much flow do you have in there?

Have the Ocean runner 3500, koralia 550gph and koralia 750gph

salvini55

I cant say for sure but i would bet that the reason your large sps are receeding at the base from not getting enough flow. I would look for a maxi jet 1200 wih a sure flow mod to up the flow. They r
Are pretty cheap and can move water very well.

Emeraude1484

Quote from: salvini55 on May 10, 2012, 12:59:35 PM
I cant say for sure but i would bet that the reason your large sps are receeding at the base from not getting enough flow. I would look for a maxi jet 1200 wih a sure flow mod to up the flow. They r
Are pretty cheap and can move water very well.

Hubby's been looking for wavemakers :D  can you suggest one or do you think the maxijet would be sufficient?